Single-round Sanitary Liquid Filter Housing - Hangzhou Darlly Filtration Equipment Co.,Ltd.

Single-round Sanitary Liquid Filter Housing is designed to meet the sanitary requirements. It adopts sanitary pipe fittings with crevice-free welding and sanitary design. It is easy to clean and disassemble, suitable for small flow filtration in low and medium pressure conditions. It is widely used in pharmaceutical, food and beverage industries.

Features

•Ultra-high polishing level, internal: Ra≤0.3μm, external: Ra≤0.4μm
•It meets GMP standards, adopts crevice-free welding and sanitary design, easy to clean, no residual liquids
•Vent/Drain Valve: the threaded sleeve is separated from stepped hose barb, so the connection tube will not rotate when venting or draining
•Body connection adopts strengthened clamp, maximum operating pressure can reach 1.0MPa
•Light in size, easy to install and disassemble, designed for low volume liquid filtration which can be used in pharmaceuticals etc.
•The housing leg adopts strengthened thread to make it have a longer service life, adjustable nut on the leg can adjust filter length to make it more convenient to use
•Suitable for CIP and SIP

Applications

•Pharmaceuticals: filtration of injections, antibiotics and other biological products
•Food and beverage: filtration of alcohol, beverage and drinking water etc.
•Petrochemical industry: filtration of oilfield water, organic solvents, acid and alkaline liquids etc.
•Microelectronics: pre-filtration of high-purity water

Surface Finish


Finish Type	Passivated Electropolished Mechanical polishing
Polishing Type	Internal: Ra ≤ 0.3μm External: Ra ≤ 0.4μm

Materials


Filter Shell	304，316L
Drain/Vent Valve	304，316L
Tri-clamp	304
Stabilizer Blade	304
Seal Material	Silicone、FKM、EPDM

Operating Conditions


Design Pressure Option	0.6Mpa (6bar)
	1.0Mpa (10bar)
Max. Operating Temperature	150℃

Connection


Shell Connection	Tri-clamp
Inlet & Outlet(N1, N2)	Tri-clamp / flange
Vent /Drain Valve(N3, N5)	Inner bole 4mm, connect with 8mm pipe
Pressure Gauge(N4)	TC-1.5"

Drawing

Ordering Information