Single-round Sanitary Liquid Filter Housing

Single-round Sanitary Liquid Filter Housing is designed to meet the sanitary requirements. It adopts sanitary pipe fittings with crevice-free welding and sanitary design. It is easy to clean and disassemble, suitable for small flow filtration in low ...

Learn More
HOME / PRODUCTS / Filter Housing / Single-round Sanitary Liquid Filter Housing

 

Single-round Sanitary Liquid Filter Housing is designed to meet the sanitary requirements. It adopts sanitary pipe fittings with crevice-free welding and sanitary design. It is easy to clean and disassemble, suitable for small flow filtration in low and medium pressure conditions. It is widely used in pharmaceutical, food and beverage industries.

 

Features

 

•Ultra-high polishing level, internal: Ra≤0.3μm, external: Ra≤0.4μm
•It meets GMP standards, adopts crevice-free welding and sanitary design, easy to clean, no residual liquids
•Vent/Drain Valve: the threaded sleeve is separated from stepped hose barb, so the connection tube will not rotate when venting or draining
•Body connection adopts strengthened clamp, maximum operating pressure can reach 1.0MPa
•Light in size, easy to install and disassemble, designed for low volume liquid filtration which can be used in pharmaceuticals etc.
•The housing leg adopts strengthened thread to make it have a longer service life, adjustable nut on the leg can adjust filter length to make it more convenient to use
•Suitable for CIP and SIP

 

 

Applications

 

•Pharmaceuticals: filtration of injections, antibiotics and other biological products
•Food and beverage: filtration of alcohol, beverage and drinking water etc.
•Petrochemical industry: filtration of oilfield water, organic solvents, acid and alkaline liquids etc. 
•Microelectronics: pre-filtration of high-purity water

 

 

Surface Finish

 

Finish Type

Passivated
Electropolished
Mechanical polishing

Polishing Type

Internal: Ra ≤ 0.3μm
External: Ra ≤ 0.4μm
 

 

Materials

 
Filter Shell 304,316L
Drain/Vent Valve 304,316L
Tri-clamp 304
Stabilizer Blade 304
Seal Material Silicone、FKM、EPDM
 

 

Operating Conditions

 
Design Pressure Option 0.6Mpa (6bar)
  1.0Mpa (10bar)
Max. Operating Temperature 150℃
 

 

Connection

 
Shell Connection Tri-clamp
Inlet & Outlet(N1, N2) Tri-clamp / flange
Vent /Drain Valve(N3, N5) Inner bole 4mm, connect with 8mm pipe
Pressure Gauge(N4) TC-1.5"
 

 

Drawing

 

 

 

 

Ordering Information

               

 

catelog

Recommended Products
Recently Viewed Products