HIGH FLOW FILTRATION SYSTEMS

Darlly High Flow Filtration system are styled on the design of corrosion resistant FRP pressure vessels. These provide considerable reduction in capital investment versus stainless steel construction and make use of a quick-acting closure.

Learn More
HOME / PRODUCTS / Filtration System / HIGH FLOW FILTRATION SYSTEMS

 

Darlly High Flow Filtration system are styled on the design of corrosion resistant FRP pressure vessels. These provide considerable reduction in capital investment versus stainless steel construction and make use of a quick-acting closure. Each vessel has the convenience of one Flter element that can be exchanged in seconds.

High Flow Filter elements are available in both polypropylene and glass micro-Fiber media in ratings of 0.5 to 100 microns, and in both nominal and absolute retention performance. The unique layered construction provides excellent retention across a wide range of ow rates. Each six inch diameter 60” length cartridge can handle flow rates of up to 500gpm with the inside-to-outside flow path allowing for high contaminant holding capacity. Superior flow and long filter life make Darlly HighFlow filters an ideal choice for a wide variety of critical process filtration applications.

The innovation of advanced German pleating technology allows the Filter elements to offer higher surface area resulting in superior flow and media utilization. With a tapered pore structure and fine fiber denier, the result is better dirt holding capacity, low resistance to flow, superior filter performance and overall better value for the user.

The inside-to-outside flow configuration and core-less construction of the Darlly HighFlow filter element allows it to be tightly compacted to minimize disposal costs. Maintenance requirements and production downtime is dramatically reduced in comparison with conventional depth filters. Service personal will and it easy & convenient remove used elements since all solid contamination is trapped inside of the lter cavity.

 

Features(HIGH FLOW FILTER CARTRIDGES)

   
High Flow Capacity per Cartridge
(vs. Conventional 2.5” Diameter Cartridges)

Less cartridges are required, therefore:

  • Reduced cartridge handling time, storage space, inventory value, & disposal costs
  • Reduced filter change-out time
  • Fewer cartridge sealing points, reduced chance of fluid bypass

Advanced Pleat Design using 
Darlly High Grade Microfiber 
Polypropylene Media

  • High Dirt Holding capacity
  • Superior chemical compatibility

Compact Design

  • Smaller housing envelope minimizes capital expense requirements
  • Reduces system footprint

Easy to Operate

  • Minimum removal tools are required for filter change-out
  • Push-to-Seat cartridge sealing mechanism provides positive seal 
  • Easy to install design handle facilitates cartridge installation and removal

Safe Materials of Construction 
Compliant with US FDA CFR-21
Requirements

  • Compatible in applications requiring direct food contact in food, beverage, & potable water processing
   

 

Features(HIGH FLOW FILTER HOUSINGS)

   
FRP - GRP housings
  • Superior chemical compatibility
  • Can withstand higher pressures 
  • Ideal solution for highly saline water
  • Lower weight of individual housings allow ease of handling

HighFlow Housing Capability 
versus Conventional Filter Housings

  • Saves time during routine servicing
  • Filter sealing risks can be avoided
  • Less individual cartridge seal points, reduces chance of fluid bypass
  • No awkward davit arm or pulley mechanism to deal with to open the unit

IMP- Replacements & Damages

  • Smaller housing minimizes capital expense requirements
  • Reduces system footprint

Ease of Use versus conventional 
Cartridge Filter Housings

  • No davit arm or tie rod issues to deal with.
  • Easy to set-up by-pass flow connections.

Capacity Scaling

  • Additional housings can be added in parallel to scale-up or 
  • scale-down the system flow rate. No need to replace the mounting skid.

Reducing capacity

  • Remove Victaulic clamps and put the blind

Flexible Design Porting

  • Ports can be oriented at the installer's preferred orientation for maximum flexibility.

Victaulic grooved ends

  • Easy to connect and disconnect with our standard Victaulic style grooved ends

Corrosion-Free Construction

  • Totally corrosion-free system, so critically important in cases of highly saline SWRO plants
   

 

CARTRIDGE SPECIFICATIONS

CARTRIDGE DIMENSIONS

   
Outside Diameter

6”

Length

20”(528mm) 40”(1022mm) 60”(1538mm)

   

CONSTRUCTION

   
Micron Ratings

0.5,1, 3, 5, 10, 15, 20, 40, 70,100

Filter media, end caps, outer sleeve

Polypropylene

Sealing o-ring options

Silicone,EPDM,NBR,Viton

   

OPERATING CONDITIONS

   
Maximum recommended flow rate in water (@20° C)

50m³/h for 40" filter

Maximum continuous operating temperature

70°C

Maximum hot water sanitisation temperature

90°C

Maximum forward differential pressure 3.4 bar @ 20°C

3.4 bar @ 20°C

Recommended change-out differential pressure

2.4 bar @ 20°C

   

 

HOUSING SPECIFICATIONS

SPECIFICATION

 
 

FILTER HOUSING

 
 

 

 

Dimensions

   

   

 

Order Information

 
 

 

Download Catalog

 

Recommended Products
Recently Viewed Products