OF Series Pleated Filter Cartridges

OF Series Pleated Filter Cartridge are manufactured to exact standards and used for filtration of oilfield fluids. Its fully thermal welded construction ensures safe operation and optimum filtration performance...

Learn More
HOME / PRODUCTS / Micro Pleated Filter Cartridge / OF Series Pleated Filter Cartridges

 

OF Series Pleated Filter Cartridge are manufactured to exact standards and used for filtration of oilfield fluids. Its fully thermal welded construction ensures safe operation and optimum filtration performance. The fully thermal welded construction ensures safe usage in filtration with high temperature fluids, acids, diesel, oily water, and solvents. The high performance 3-layers media construction generally have a higher dirt-holding capacity in part due to the more consistent pore size throughout the media with larger filtration area at an absolute rating of beta5000 (99.98% effective efficiency). As the synthetic fibers are smaller than cellulose fibers, they can be packed tightly together, creating more pores to trap and hold particles. Synthetic fibers also perform better in harsh environments that tend to damage cellulose filters. OF series is manufactured with a rigid outer cage, ideally suitable for use in harsh oilfield environments and available in a wide range of microns, contributing to the protection of oilfield formations.

 

Features

 

•Large filtration area and depth filtration provide a long life time
•Fully thermal welded without glues or adhesives
•Beta5000 (efficiency 99.98%) for glass fiber media
•Low cost due to large filtration area and low frequency of change out
•Three layers construction:
•Glass fiber media with PET support layer for maximumremoval performance,strength and stability
•The higher strength of outer hard cage

 

 

Applications

 

•Completion fluids
•Work over fluids
•Gravel pack fluids
•Waste water
•Diesel, fuel & oil
•Surface water intake
•Run-off water
•Polishing brines
•Gels, amines & glycols
•Process water
•Pre filtration RO
•Stimulation fluids
•Acids flow back

 

 

Dimension

 
Outer Diameter 64mm
Inner Diameter 28mm
Length 30 ”,40 ”
 

 

Material of Constructions

 
Media PP , PET , Glass Fiber
End Cap Material PP
Center Core PP
Outer Cage PP
Sealing Silicone, EPDM, NBR, FKM
End Cap Types 222/Flat End
 

 

Performance

 
Operating pressure and temperature change out differential pressure 
35psi(2.5Bar) 
Max. workong Temperature 80℃
Max. Differential pressure 5.5 bar @ 25℃
Beta 5000(99.98% removal efficiency) for glass fiber media
Construction Fully thermal welded
 

 

Quality

 

•Manufactured according to ISO9001:2015 certified Quality 
•Management System

 

 

Drawing

 

 

 

 

Ordering Information

               

 

catelog

Recommended Products
Recently Viewed Products