Sanitary Pipeline Filter Housing - Hangzhou Darlly Filtration Equipment Co.,Ltd.

Sanitary Pipeline Filter Housing designed with compact structure is very cost-efficient. The feed liquid enters from top and leaves from bottom, it's connection mode adopts tri-clamp . It is equipped with vent and drain interfaces which can be used for gas and liquid filtration.

Features

•Ultra-high polishing level, internal: Ra≤0.3μm, external: Ra≤0.4μm
•Vent/Drain Valve: the threaded sleeve is separated from stepped hose barb, so the connection tube will not rotate when venting or draining
•Body connection adopts strengthened clamp, max. operating pressure can reach 1.0MPa
•The filter housing adopts compact design, materials flow in from top and out from bottom, is cost-effective and can meet sanitary requirements

Applications

•For liquid: particle filtration of pipeline liquids
•For gas: used in pipe connection or as a respirator
•Filtration of alcohol, beverage and edible oil etc

Surface Finish


Finish Type	Electropolished Mechpolished
Polishing Type	Internal: Ra ≤ 0.3 μm External: Ra ≤ 0.4 μm

Materials


Filter Shell	304，316L
Drain/Vent Valve	304，316L
Tri-clamp	304
Seal Material	Silicone、FKM、EPDM

Operating Conditions


Design Pressure Option	0.6Mpa (6bar)
	1.0Mpa (10bar)
Max. Operating Temperature	150℃

Connection


Shell Connection	Clamp
Inlet & Outlet	Tri-Clamp / Flange
Vent Valve	Inner bole 4mm Connect with 8mm pipe
Drain Valve	Inner bole 4mm Connect with 8mm pipe

Drawing

Ordering Information